Wind Turbine Selector

9 suitable wind turbines found.
# Manufacturer Product Rated power Rotor diameter Hub height (Tip height) Annual Energy Production* Capacity factor*
1 Siemens SWT-6.0-154 6,000 kW 154.00 m 107.0 m (184.0 m)** 28.9 GWh 54.9 %
2 Siemens SWT-4.0-120 4,000 kW 120.00 m 90.0 m (150.0 m)** 18.1 GWh 51.5 %
3 Siemens SWT-4.0-130 4,000 kW 130.00 m 95.0 m (160.0 m)** 19.4 GWh 55.3 %
4 GE Haliade 150-6MW 6,000 kW 150.95 m 105.48 m (180.95 m)** 28.4 GWh 53.9 %
5 Senvion 6.2M152 OFFSHORE 6,150 kW 152.00 m 106.0 m (182.0 m)** 29.1 GWh 53.9 %
6 Siemens Gamesa Renewable Energy SG 8.0-167 DD 8,000 kW 167.00 m 113.50 m (197.0 m)** 37.0 GWh 52.8 %
7 Siemens SWT-7.0-154 7,000 kW 154.00 m 107.0 m (184.0 m)** 31.7 GWh 51.7 %
8 Senvion 6.2M126 OFFSHORE 6,150 kW 126.00 m 93.0 m (156.0 m)** 24.2 GWh 44.9 %
9 Adwen AD 8-180 8,000 kW 180.00 m 120.0 m (210.0 m)** 39.5 GWh 56.3 %

*Annual Energy Production and Capacity factor are estimated based on Average wind speed at Measurement height specified in the filter section and following assumptions: Rayleigh distribution (Weibull distribution with a shape factor of 2); average wind speed adapted to Hub height applying power law with wind shear exponent of 0.2 (onshore) or 0.14 (offshore), respectively; power curve estimated between cut-in (= 3 m/s if not available) and cut-out (= 25 m/s if not available) wind speed using Rotor diameter of wind turbine, standard air density of 1.225 kg/m3 and CP of 45% until Rated power of wind turbine is reached; all calcuations are done according to references listed below;
**Hub height of offshore wind turbines is calculated by adding the rotor radius to the Distance between bottom blade tip and mean sea level, i.e. the manufacturer has to be consulted whether the hub height shown is possible.

References

[1]

International Electrotechnical Commission (IEC). International Standard: Wind turbines - Part 3: Design requirements for offshore wind turbines. IEC 61400-3:2009.

[2]

International Electrotechnical Commission (IEC). International Standard: Wind turbines - Part 1: Design Requirements. IEC 61400-1:2005.

[3]

International Electrotechnical Commission (IEC). International Standard: Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines. IEC 61400-12-1:2017.